ANSI Seals-manufacture,factory,supplier from China

Mechanical sealsDifferent mechanical seals available.

1. The 3196 ANSI Series is available in a wide range of sizes, capacities and materials to fit virtually any process-fluid application.

Reliable OperationHigh Efficiency Wide Hydraulic CoverageMechanical sealsDifferent mechanical seals available.

Mark III is diagnosed global as the surest name in ANSI chemical process pumps.

Our seal chambers permit seals to run cooler with higher face lubrication.

Absolutely open impeller is the first-class layout for the chemical process industries services. Ideally fitted for corrosives and abrasives, handles solids and stringy fibers simply. Lets in for easy healing of clearances while wear takes place. Lower back pump-out vanes reduce stress at the shaft seal, reduce axial thrust at the bearings.Our seal chambers permit seals to run cooler with better face lubrication. Keep solids, air and vapors faraway from the seal faces for prolonged seal lifestyles.Our electricity ends design maximizes reliability and mean time among failure (mtbf).

The 3196 ansi series is to be had in a huge range of sizes and capacities to match clearly any method-fluid software.Utility: Chemical processingGeneral industriesMiningWater sourcesEnergy technologyPrimary metalsPulp and paperOil and gasolineCapacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)Available Size:6''-15''Part NameMaterialDuctile Iron316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCasing316SSCD4MCuAlloy 20NickelHastelloy CTitaniumImpeller316SSCD4MCuAlloy 20NickelHastelloy CTitaniumCover316SSCD4MCuA

Our Pump Replacement elements are reliable, price effective alternative parts which are interchangeable with many widely known pump manufacturers.We manufacture more than a few alternative elements together with shafts, casings, impellers, stuffing container covers, sleeves, labyrinth seals, repellers, backplates, fans and lots of extra.

Our Pump Replacement Parts are reliable, cost effective replacement parts that are interchangeable with many well known pump brands.We manufacture a range of replacement parts including shafts, casings, impellers, stuffing box covers, sleeves, labyrinth seals, repellers, backplates, followers and many more.Conforming to ASME (ANSI) B73.1, Mark 3 pumps incorporate many proven reliability- and performance-enhancing features.

Material selection:Our standard Duplex stainless steel ASTM A890 Grade 3A is stronger, harder and has higher pitting corrosion resistance than stainless steel which is conventionally used for double suction pumps.Packings:Split stuffing box gland and lantern ring assure quick and easy change of packings.Packings with or without external or internal sealing liquid provide flexibility according to application.Mechanical seals:Different mechanical seals available.Seals fit into the same chamber as packingsproviding easier change-over to another type of sealing. 

Every day in over 500,000 installations, 3196 ASME/ANSI (B73.1M) process pump proves why it’s the industry standard for performance.

Mark III is recognized international as the most suitable name in ANSI chemical method pumps.

Mark III is identified worldwide because the most advantageous name in ansi chemical procedure pumps.

Conforming to ASME (ANSI) B73.1, Mark 3 pumps incorporate many proven reliability- and performance-enhancing features. They are available in a wide range of configurations, including mechanically sealed, dynamically sealed, sealless magnetically driven, low-flow, self-priming and recessed impeller.

The 3196 ANSI collection is to be had in a wide variety of sizes, capacities and substances to match absolutely any technique-fluid application.RECEIVING THE PUMPInspect the pump as soon as it is received. Carefully check that everything is in good order. Make notes of damaged or missing items on the receipt and freight bill. File any claims with the transportation company as soon as possible.STORAGE REQUIREMENTSShort Term: (Less than 6 months) normal packaging procedure is designed to protect the pump during shipping.

Centrifugal Pump. • Model 3196. • S/N 788B861. • Size 1 in. x1-1/2 in. x 8 in. • Water flush double mechanical seals. Motor 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase, Capacity 14 gpm. • Overall Dimensions 35 in. L x 12 in. W x 15 in.

Conforming to ASME (ANSI) B73.1, Mark 3 pumps include many proven reliability- and overall performance-enhancing features. They're to be had in a huge range of configurations, which include mechanically sealed, dynamically sealed, sealless magnetically pushed, low-waft, self-priming and recessed impeller. It presents flexibility and breadth of pumping solutions in limitless applications.GENERAL DESCRIPTION OF PUMPThe Mark III chemical process pump is a horizontal, end suction, single stage, centerline discharge, centrifugal pump.

Conforming to ASME (ANSI) B73.1, Mark 3 pumps incorporate many proven reliability- and performance-enhancing functions. They're available in a wide range of configurations, which includes routinely sealed, dynamically sealed, sealless magnetically pushed, low-waft, self-priming and recessed impeller.

Fully open impeller is the excellent design for the chemical manner industries services. Ideally suited for corrosives and abrasives, handles solids and stringy fibers conveniently. Permits for simple recuperation of clearances while wear takes area.

The 3196 ANSI Series is available in a extensive variety of sizes, capacities and materials to match sincerely any manner-fluid software.1.Application:  Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas 2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)  3.Available Size:6’’-15’’ 4.ImpellerDesigned for long-term, maintainable performance and minimum hydraulic loads formaximum reliability. CASING• Top centerline discharge for air

Chemical Process PumpsDesigned for Total Range ofIndustry ServicesI Capacities to 7000 GPM (1364 m 3 /h)I Heads to 730 feet (223 m)I Temperatures to 700°F (371° C)I Pressures to 375 PSIG (2586 kPa)Product Description:The 3196 ANSI series is to be had in a huge variety of sizes, capacities and materials to match virtually any system-fluid utility.ImpellerDesigned for long-term, maintainable performance and minimum hydraulic loads formaximum reliability.CASING• Top centerline discharge for air handling, self-venting.• Class 150 pumps have Class 300 wall thickness as standard.• Back pull-out desi

Conforming to ASME(ANSI) B73.1, the Mark 3 chemical process pump provides outstanding hydraulic performanceand many proven reliability- and performance-enhancing features. And it is recognized international as the most suitable name in ANSI chemical method pumps.1.Application: Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar)3.Available Size:6''-16''

The 3196 ANSI Series is recognized international as the most suitable name in ANSI chemical method pumps. And it is available in a extensive variety of sizes, capacities and materials to meet any application requirements.1.Application:Chemical ProcessingGeneral IndustriesMiningWater ResourcesPower GenerationPrimary MetalsPulp and PaperOil and Gas2.Capacities to 7000 GPM (1590 m³ /h)Heads to 730 feet (223 m)Temperatures to 700° F (371° C)Pressures to 375 PSIG (26 bar) 3.Available Size:6''-15''

Proven PerformanceEvery day in over 500,000 installations, the 3196 ASME/ANSI (B73.1M) process pump proves why it’s the industry standard for performance.