Sulzer WPP Pump-manufacture,factory,supplier from China

All chrome steel systems for tremendously corrosive conditions.

All pumps in have been standardized, using common modules and components, for maximum interchangeability and easy installation and maintenanceA double volute casing in larger  pumps reduces radial forces and shaft deflection.The self-venting, top centerline casing prevents air lock in the top of the casing. The sideplate is adjusted externally to maintain a constant impeller clearance and continuous high efficiency.Impeller mounting provides strong, reliable power transmission. It is self-locking and reverse rotation safe. Facilitates the installation and removal of the impeller.

Operating data:Capacities 7,000 m 3 /h / 31,000 USgpmHeads 110 m / 360 ft   Temperatures 180°C / 356°FFrequencies 50 or 60 HzPressures 16 bar / 230 psi depending on material and sizeTo ensure maximum reliability in opposition to corrosion we provide material choice alternatives from our very own metallic foundries.All parts in contact with the pumped liquid can be constructed from the equal creation material because the pump casing.

All stainless-steel structures for extraordinarily corrosive situations. all parts inclusive of the adapter and bearing unit are manufactured from chrome steel.Moreover, stainless steel may be selected for the bearing unit auxiliary device to offer longer working lifestyles in corrosive surroundings.1.Our wear pump used for corrosion and  abrasion pumping occasion.

1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110m Capacity 2000l/s     Temperature 180℃

We help our customers with an  big range of pumping offerings,  from spare components to faraway monitoring. additionally we offer various types  of service agreements wherein spare  components and carrier answers can be  mixed.1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110mCapacity 2000l/s     Temperature 180℃All parts in contact with the pumped liquid can be produced from the same construction material as the pump casing.

We support our customers with an  extensive range of pumping services,  from spare parts to remote monitoring. Additionally we offer various types  of service agreements in which spare  parts and service solutions can be  combined.1.Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.Performance(Max parameter)Heads 110mCapacity 2000l/s     Temperature 180℃All parts in contact with the pumped liquid can be produced from the same construction material as the pump casing.

High pumping performance comes as a stop end result of the supply, reliability and nice of the right pump. Right spare parts and proper safety Make certain the excessive typical performance of  pumps in complicated production operations.We aid our clients with an huge form of pumping offerings, from spare elements to far flung monitoring.

The concept for sealing water equipment meets all the requirements demanded by the pumped liquid or the shaft seal. All general pumping solutions can be covered by just four different options. Special materials to take into account corrosive environments ensure reliable operation in extreme circumstances.1. Our wear pump used for corrosion and  abrasion pumping occasion. Also well used for  anti-blocking occasion.2.

Predominant benefits：Lengthy and relied on enjoy in all commercial segmentsExceptional overall performanceExceeds fashionable necessities of worldwide iso 5199 and iso 2858 standardsSuitable for the maximum stressful business programsPrecise, patented and superior design features limit life cycle pricesQuick and clean installation, safe operation, smooth preservation and serviceMajor programsSmooth and lightly contaminated liquidsViscous liquidsFibrous slurriesMassive solids containing beveragesFuel containing beverages and self-priming packagesPredominant design featuresFlexible, dependable,

Reliable OperationHigh Efficiency Wide Hydraulic CoverageMechanical sealsDifferent mechanical seals available.

 Zpp Pump's core is flow control and applicators.

Quick and Easy Installation ConceptThe rigid, distortion-free, hot-dip galvanized baseplate is easy to install and grout into the concrete foundation. With various installation options, the pump helps minimize the  life-cycle costs.1.The optimized frame size and standardization reduces concrete needs up to 30 %.

1.Our pump broadly used for all conventional pumping event in pulp and paper mills. the precise design of app pump, make the pumping slurry easy like water, slurry density can attain 8%.2.Overall performance(max parameter)Heads 160mCapability 2000l/sTemperature 180℃3.To be had size:32-600

Prolonged mechanical seal and bearing lifestyles through strong shaft and bearing designs that still limit shaft deflection.Rapid and accurate impeller placing with the industry's maximum revolutionary external impeller adjustment mechanism.In-keep reverse vane impeller adjustment with the most effective pump that takes full gain of the again pull-out design.STARTING THE PUMP AND ADJUSTING FLOW1. Open the suction valve to full open position. It is very important to leave the suction valve open while the pump is operating.

Centrifugal Pump. • Model 3196. • S/N 788B861. • Size 1 in. x1-1/2 in. x 8 in. • Water flush double mechanical seals. Motor 1.5 hp, 1,730 rpm, 230/460 V, 60 Hz, 5.6/2,8 amps, 3 phase, Capacity 14 gpm. • Overall Dimensions 35 in. L x 12 in. W x 15 in.

The mark III chemical technique pump is a horizontal, give up suction, unmarried level, centerline discharge, centrifugal pump.

Reliable OperationHigh Efficiency Wide Hydraulic CoverageBetween bearings, unmarried level, axially cut up, double access appropriate for fashionable business pumping in addition to low pulsation headbox packages in ppi with notably polished inner surfaces.Overall performance varietySulzer pumps gives correct coverage with many pump sizes for low and high head applications with high efficienciePerformance  Capacity max.

Proven PerformanceOver One Million Process Pump Installations WorldwideWhen the 3196 ANSI Standard Dimension Process Pump was first introduced in 1961, it immediately became the standard for the industry. Today, the number of installations attest to its remarkable performance.

We provide innovative pumping solutions to business partners in the following industries:• Oil and Gas• Hydrocarbon Processing• Pulp and Paper• Power Generation• General Industry• Chemical Process Industry• Watera.Closed Impelleris used for pumping clean liquids or liquids containing some impurities.For pump types:APPEPPb.Open Impelleris designed for liquids containing solid particles, abrasive liquids or stock up to 8 % consistency.For pump types:APPARPASPEPPc.Special Open Impelleris suitable for liquids containing larger solid particles and long fibers, abrasive liquids or stock up to 8 % co

Drillings in PumpEmptying holes• Casing• Dynamic seal• S version casing for vacuum pump• R version stuffing box housingTemperature measurement connections• Casing cover• Dynamic seal housing• S pump casing for vacuum pump• R pump stuffing box housingSurface TreatmentPainting• EN ISO12944• Thickness 200 µm• Epoxy max. 150 oC / 300 oF• Silicon aluminum and epoxy above 150 oC / 300 oF• Base also available with zinc epoxyGrinding• Interior surfaces- Ra 6.3- Cotton ball• Open impellers only• Sandblasting also availableWashingSpecial care is taken to ensure the cleanliness of the pump.

The Mark III chemical process pump is a horizontal, cease suction, unmarried degree, centerline discharge, centrifugal pump.

Ahlstar app/t stop-suction unmarried-stage centrifugal process pumps are used for annoying business programs to make sure process reliability, excessive efficiency and occasional running costs.Excessive overall performance manner pumps for stressful packagesVersatile Solutions for Degassing ApplicationsPositive Inlet HeadWhen pumping gas containing liquids in unstable inlet head applications, the AHLSTAR pump with LM integrated liquid ring pump degassing unit secures reliable pumping.• Single mechanical seal with recirculation flushing for clean liquids.• Single mechanical seal with extern

Our Pump substitute components are reliable, cost effective replacement elements which might be interchangeable with durco etc widely known pump manufacturers.We manufacture more than a few substitute parts including shafts, casings, impellers, stuffing container covers, sleeves, labyrinth seals, repellers, backplates, fans and plenty of more.MAINTENANCEPREVENTIVE MAINTENANCEA procedure for keeping accurate maintenance records is a critical part of any program to improve pump reliability. There are many variables that can contribute to pump failures.